A very high quality multi purpose spray paint with a durable finish. These aerosols give a very even and fine spray for a really good coverage.
Suitable for most plastics, wood, fibreglass and body filler.
To Prepare Surface
- Remove flaky paint and rust with a wire brush
- Smooth off with wet and dry
- Ensure surface is dry and free from oil and grease
To Prime Surface
- Apply two coats of grey primer
- Allow to dry for two hours
- Smooth with fine wet and dry
To Paint Surface
- Shake can for 3 minutes
- Hold can 10 - 15 inches from surface
- Spray using using smooth, even strokes
- Leave until touch dry before applying further coats
- Do not over spray
Caution
- Pressurised container
- Protect from sunlight
- Do not expose to temperatures exceeding 50 degrees celsius
- Do not pierce or burn even after use
- Do not spray onto a naked flame or incandescent material
Safety Information:
- Irritating to eyes.
- Repeated exposure may cause skin dryness or cracking.
- Vapours may cause drowsiness and dizziness.
- Keep out of reach of reach of children.
- Keep away from sources of ignition - NO SMOKING.
- Do not breathe vapour/spray.
- In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
- Wear suitable gloves.
- Use only in well ventilated areas