RS Silver is an extremely Hi-density Hi-performance spray paint with a durable finish. Usually only requires one pass to complete the job. These aerosols give a very even and fine spray for a brilliant coverage. Suitable for most plastics, wood, fibreglass and body filler.
To Prepare Surface: Remove flaky paint and rust with a wire brush. Smooth off with wet and dry paper. Ensure surface is dry and free from oil and grease
To Prime Surface: Apply two coats of grey primer. Allow to dry for two hours. Smooth with fine wet and dry paper.
To Paint Surface: Shake can for 3 minutes. Hold can 10 - 15 inches from surface. Spray using using smooth, even strokes. Leave until touch dry before applying further coats if required. Do not over spray.
IMPORTANT: Avoid spraying in damp conditions. Always invert can and spray to clear nozzle after use