Silver Wheel Paint 500ml

Wheel silver paint is tough fast drying acrylic paint, offering a convenient alternative to conventional spray equipment.

It is suitable for most applications in the automotive and general industrial areas, and is compatible with most other paint systems.

Directions

• Prepare surfaces by lightly sanding with wet or dry paper.
• Ensure that surfaces are clean and free from oil and grease.
• It is recommended that a good quality undercoat is applied first and allowed to dry for 2 hours before spraying the silver paint.
• Shake can vigorously for 2 minutes.
• Spray from a distance of 25 to 30 cm and apply a number of thin coats, allowing 10 minutes between coats.
• Leave for 24 hours to allow the paint to harden.
• After use invert can and spray for a few seconds to clear the nozzle.

Caution

• Pressurised container
• Protect from sunlight
• Do not expose to temperatures exceeding 50 degrees celsius
• Do not pierce or burn even after use
• Do not spray onto a naked flame or incandescent material

Safety Information:

• Irritating to eyes.
• Repeated exposure may cause skin dryness or cracking.
• Vapours may cause drowsiness and dizziness.
• Keep out of reach of reach of children.
• Keep away from sources of ignition - NO SMOKING.
• Do not breathe vapour/spray.
• In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice.
• Wear suitable gloves.
• Use only in well ventilated areas